Jump to content
  • Welcome!

    Welcome to BARCS forums, full of great information and ideas about your favourite hobby . Please register if you'd like to take part.

  • Who's Online   17 Members, 0 Anonymous, 122 Guests (See full list)

    • John Minchell
    • George Young
    • Nick
    • Kyri
    • soaring steve
    • Peter G
    • mikef
    • sorry
    • RogerW
    • AJH
    • gilbo
    • PaulR
    • groom_k
    • Neil Harrison
    • Sungem
    • Frosty
    • wookman
  • Upcoming Events

  • Topics

  • Vendor Topics

  • Today's Birthdays

    No users celebrating today
  • Posts

    • groom_k
      For Sale – Amokka 1 Moulded Flying Wing from Peter Wick  The Amokka is a fully moulded flying wing designed and produced by Peter Wick. It’s smooth and fast model to fly and tracks well even in strong or blustery conditions. The controls are progressive without needing to use large control throws. The Amokka is aerobatic and will happily withstand long dives and high speed passes without significant flex or twist. This model was made in Peter’s personal moulds and is not a commercial production model. The strength of the airframe is very good (as you will see from the attached links, the model can be used for lightDS). The paint and surface finish of the wing is not the same as commercial production model but this does not effect the flying performance and can’t be noticed if you are more than a few feet away from the model. Specification:- - Wing span: 1.96m - Wing area: 37.83dm2 - Wing section: Peter Wick (4 different sections across the wing)  - Aspect ratio: 10.15 - Weight: around 1750g The model comes with:- - 2x MKS 6125 servos on the ailerons  - 2x MKS 6100 on the flaps - 1x Jeti 2600mah Li-Ion battery  - 1x Zepsus switch and regulator - Custom made bags for the wing and fin - Settings information All you need to do is fit your RX and fly.  £400 ONO If you fly Jeti, I will happy send you my transmitter file I used to fly the model and am offering to include a Jeti R9 Receiver with the model for £40. It’s too hard to post. I’d be happy to meet at the Bwlch at a weekend or somewhere on the M4 corridor between London and Bristol during the week. Alternatively it may be possible to get the model to you via the F3F postal service. For more information please visit:-  https://www.rcgroups.com/forums/showthread.php?940412-Amokka-Race-Plank/page5
    • pete beadle
      Hi Nigel When I used to find my ballast was slightly small, I used to wrap two pieces of electrical tape around each "slug" that usually worked, and cured the rattling at the same time Don't forget you'll probably need a couple of wooden dowels of "slug length" and another couple "half slug length" ones to use to keep the CG where it should be....... I used to measure the length/depth of my ballast tube with 3/8ths wooden dowels a half metre long I've had two Expro's over the years and never found the need to use ballast with either though. odd....... Hope this helps Regards Pete BARCS1702
  • Member Statistics

    • Total Members
    • Most Online

    Newest Member
    Mick Barnett
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.