jetpipe Posted September 26, 2020 Share Posted September 26, 2020 OK Brainiacs, here's my latest problem. I've got this 2m electric glider with a Hacker X20 Esc which is some years old now. It's working ok but it insists on going through it's whole programming routine every time I connect the battery. This is with the throttle closed. This takes a long time. There's nothing in the instructions about this. Anybody got any ideas about how to stop it? Thanks, John. Link to comment Share on other sites More sharing options...
Feefo Posted September 26, 2020 Share Posted September 26, 2020 Have you tried lowering the throttle trim or lowering the servo end point for the off position on the throttle? Programming mode is normally activated by having the throttle in an on position before you connect the battery. Link to comment Share on other sites More sharing options...
jetpipe Posted September 26, 2020 Author Share Posted September 26, 2020 Yeah, it goes in to programming mode whether throttle is open or not. Yes I've tried throttle trimmed up and down. Link to comment Share on other sites More sharing options...
Feefo Posted September 26, 2020 Share Posted September 26, 2020 Can you lower your end point in servo calibration? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now