Pico Switch RED in stock (Ideal for F5J, battery backup)

[Jonathan W]

Pico Switch RED In Stock 

 

Features: -

Our intelligent Magnetic Switch knows what ON/OFF state it’s in, If the battery is disconnected with the switch in its off state, it will remember this for Seconds.  If the battery is disconnected when turned ON, the switch will be default ON when reconnected.   

 Battery Backer - both inputs can be a battery or BEC/UBEC. The input with the highest voltage will be the main source of power.  If both inputs are the same voltage, then the source of power will be both “simultaneously”.  If a battery fails or goes under voltage the switch will disconnect/isolate that battery from the circuit, if it recovers, the switch will re-engage it.  “Pico Switch RED” allows you to use batteries of different capacity, number of cells and chemistry type. 

Our switches have an interactive feature - The LED flashes under normal use, when the magnet is placed over the active area, the LED goes solid "ON" as the magnet is sensed, as soon as the timer has counted 3 seconds the LED goes "OFF" and gives a confirmation FLASH until the magnet is moved away.

Swipe version - The Blue LED is on constant until turned OFF. • Our magnetic switch utilizes a Hall Effect Sensor (no mechanical switching parts). Careful firmware design ensures that stray magnetic fields cannot toggle the switch incorrectly; we guarantee 99.9% operating under normal conditions.

Positively switched – Ideal for electric models, esc safe, there’s no need for an opto isolator.

Safe and reliable: - Default ON – if the battery is disconnected (whilst in its ON State) and then reconnected the output will turn ON 99.9% of the time.  I.e. brownout due to bad battery connection.  The magnetic switch is programmed to sample the magnet over  the sensor for a set period without interruption and only  then will it turn the output OFF. 

http://www.practicalrc.com/pico-switch-red.html