Jump to content

Kent Interclub Glider 1 Multi-launch on 21st April 2024


Terry

Recommended Posts

Kent Interclub Glider 1 Multi-launch Competition on  21st April 2024 at SADMAC' Field.

 

 

You are invited to Kent Interclub Glider 1 Multi-launch competition to be held on 21st April 2024, CD on the day to be Terry Letchford.  This is an open competition and non-Kent Interclub club members are very welcome (entry fee £5).  For KIC flyers only – note that this competition will also use the scoring for the 2024 Kent Cup.

We want to have a full day's flying so please check in 09:30 latest and be ready for Pilots Briefing at 09:45 with the competition starting at 10:00 sharp.

To enter, please click on Reply to this topic no later than 6pm Friday 19th April with model class, and frequency if not 2.4 (Glider, Electric, Open, 100" etc) so a matrix can be set up. 

A final decision to confirm or cancel depending on the weather will be posted here by 12 noon on Saturday 20th April. (Please note that entrants need to check here and will not be emailed about cancellation.)

 

Location: 

From A2 at Bapchild, turn left (right if approaching from Faversham) into Hempstead lane. Go left at the next road through Tong Mill and continue past the church then the golf club and turn right at the next junction, Blacketts Road. Continue along road until you reach the farm entrance gate.

The nearest postcode is ME9 9AU or Using What3Words (phone app) with location headers.marshes.arch

Entrance to the farm is by electronically controlled gates, which requires a SADMAC member to open. Please call 077393 20806 or 07941 814019 and we will open the gates remotely. 

 

Additional Info:  

The rules are a variant of BARCS Multi-launch but, for Electric launch gliders. As before, Electric launch gliders must be fitted with an AMRT (height limiter) which cuts the motor at 30 secs and records the launch height. Electric launch height remains at 175m but there will now be a penalty of 3 pts per metre for Electric launches exceeding it.   Most pilots will want to set AMRTs to cut a little below 175m. It is fine instead to use F5J firmware and cut the motor manually.

This event will be using Gliderscore eScoring via smart phones.  We will print and issue a score record card for you to record your round scores and set up your phones via QR matrix

A minimum of 4 rounds and a maximum of 6 rounds will be flown

 

Disciplines:   

Glider, Electric, Open, 100”

 

Competitors

Terry Letchford.    Open Electric

Keith Fisher           Open Electric

Greg Hayfield        Winch

Iain Stingmore.      Winch

Ian Nicholls.          Electric

John Postal           Electric

Brian Martin         Open Electric

Eddy Small.          Open Electric

Bob Ryan              Open Electric

Nick Jackson.       Open Electric

David Yale.            Electric

Jeremy Ault.         Electric

Richard Harris      Electric

David Ashby.         Electric

Alan Twine.            Open Electric

Derek Collings.      Open Electric

Gordon Looms       Open Electric

John Rutland.         Open Electric - Tonbridge

 

Link to comment
Share on other sites

Nicholls

Bloobirds Greg Hayfield, Iain Stingemore with winch launched gliders and me with electric will be coming. 

Link to comment
Share on other sites

  • Committee Member
Nick Jackson

Open electric, please.

Link to comment
Share on other sites

alstorm1538

Electric open please for

Alan Twine, Derek Collings and Gordon looms

Link to comment
Share on other sites

Nicholls

Please add John Rutland Open electric Tonbridge 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.