chiloschista Posted February 15, 2018 Share Posted February 15, 2018 Hello ensemble, recently a friend did propose the build of this plane, from a german magazine (FMT) plan: the SALy. So there was stimulus to put machines at work. I designed all the cut files for wood pieces, writings, grapics and a few 3D printed pieces too. Those include servo tray, nose cone, wing screw base and more to come. Four kits were cut for a club build. The prototype is now almost finished, so I thought about sharing the build here. Best regards, Ric Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 Build of the vertical fin and fuselage. Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 1 Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 Servo tray prototype . Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 Servo trays in place, with top cover. Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 Horns matched to exact needs and cnc cut. Not perfect as they were cut from scrap pieces. Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 A couple of more 3D prints. Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 Writings cut with a drag knife. Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 Covered and some graphics, also cut with a drag knife. Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 And here is the final result, still missing of balancing weights and radio system. 4 Link to comment Share on other sites More sharing options...
oipigface Posted February 15, 2018 Share Posted February 15, 2018 What software do you use, Ric? Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 9 minutes ago, oipigface said: What software do you use, Ric? As CAD I use Rhino5 and CAM madCAM5. For 3D slicing Cura3.1. Link to comment Share on other sites More sharing options...
satinet Posted February 15, 2018 Share Posted February 15, 2018 you do nice work Ric 4 Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 28 minutes ago, satinet said: you do nice work Ric Hey thanks! Link to comment Share on other sites More sharing options...
isoaritfirst Posted February 15, 2018 Share Posted February 15, 2018 Very nice mix of materials Ric. Link to comment Share on other sites More sharing options...
chiloschista Posted February 15, 2018 Author Share Posted February 15, 2018 1 hour ago, isoaritfirst said: Very nice mix of materials Ric. Thanks Mike! Link to comment Share on other sites More sharing options...
paulj Posted February 20, 2018 Share Posted February 20, 2018 Looks fantastic - is the plan still available? Link to comment Share on other sites More sharing options...
paulj Posted February 20, 2018 Share Posted February 20, 2018 I can answer my own question: The plans are available at http://shop.vth.de/downloadplan-saly.html for 19.95 EUR. Link to comment Share on other sites More sharing options...
chiloschista Posted February 20, 2018 Author Share Posted February 20, 2018 3 hours ago, paulj said: I can answer my own question: The plans are available at http://shop.vth.de/downloadplan-saly.html for 19.95 EUR. No, there are pdf around. Let me arrive home and I will post or link one. Ric 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now