Jump to content
Jonathan W

Introducing our "Pico Switch+"

Recommended Posts

Jonathan W

Introducing our "Pico Switch+" perfect for F3X

More information here: -http://www.practicalrc.com/pico-switch.html

All switches now come with silicone wire.

22AWG - ~7A Max ~14A for seconds.
20AWG(+) - ~14A Max ~20A for seconds.
The semiconductor can withstand ~50A Max peak
Standby Current (Off State) - ~4µA

 

Features: -

Our intelligent Magnetic Switch knows what ON/OFF state it’s in, If the battery is disconnected with the switch in its off state, it will remember this for Seconds.  If the battery is disconnected when turned ON, the switch will be default ON when reconnected. 

Our switches have an interactive feature - The LED flashes under normal use, when the magnet is placed over the active area, the LED goes solid "ON" as the magnet is sensed, as soon as the timer has counted 3 seconds the LED goes "OFF" and gives a confirmation FLASH until the magnet is moved away.

Swipe version - The Blue LED is on constant until turned OFF.

Our magnetic switch utilizes a Hall Effect Sensor (no mechanical switching parts). Careful firmware design ensures that stray magnetic fields cannot toggle the switch incorrectly; we guarantee 99.9% operating under normal conditions.

Positively switched – Ideal for electric models, esc safe, there’s no need for an opto isolator.

Safe and reliable: -   Default ON – if the battery is disconnected (whilst in its ON State) and then reconnected the output will turn ON 99.9% of the time.  I.e. brownout due to bad battery connection.  The magnetic switch is programmed to sample the magnet over the sensor for a set period without interruption and only then will it turn the output OFF.  Extremely resilient to magnetic interference due to the switches microcontroller that is programmed with an algorithm.

More information here: -http://www.practicalrc.com/pico-switch.html

SAM_1407.JPG

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.