Search the Community
Showing results for tags 'frsky'.
Found 4 results
-
I'm finding that when telemetry is on for my FrSky RX6R the servos are pulsing, goes away with telemetry off. My assumption is this pulse is caused by the Rx powering up to transmit back to the Tx. Unfortunately in the tight fuselage of a glider the servo cable and shielded part of the Rx aerial have little choice but to be very near on another. Since I don't really have the option to move the Rx/wires in this model but I am wondering if some shielding could be employed on the servo wires. I assume others have encountered this - what was your cure?
-
I recently purchased a FrSky RX4R reciever, could not get it to bind to my Taranis. I hope my findings may help others who have the same problem. The RX4R was EU LBT firmware, so as my Taranis was NON UK OpenTX. I was not too surprised. Re-flashed my Taranis to EU LBT, expecting that to solve the problem, but no, would still not bind. After much searching online, I found that it was the XLT module that needed flashing , not the transmitter. Flashed the internal XLT module to EU LBT and it now binds. Following some experimentation I find that I could use NON EU OpenTX provided the Internal
-
Come on then, who's got their X9e? First impressions are very good in terms of the hardware. The gimbals feel really nice with a fairly strong return to centre. New sliders are good. I'm glad they've gone for proper trims not joy pad rubbish. The side cheeks are removable. The rotary wheel is nice and the interface lacks the lag and general slowness of the original taranis. It's much sharper. The wheel is a massive improvement. Amazing value for money. If only opentx would sort out the flight modes, then we we would be living the dream! Please do a flight mode trim screen, like Jeti! The sp
-
Hi all Couldn't resist it....... http://www.frsky-rc.com/ad/X12S.html Regards Pete BARCS1702
